About the Wet Sounds EZ-GO TXT audio system
![Jon Paul](http://images.crutchfieldonline.com/ImageBank/v20210105085800/core/people/writers/JonP.png)
Ultimate sound for your EZ-GO TXT golf cart
Ultimate sound for your EZ-GO TXT golf cart
Gone are the days when a golf cart audio system consisted of a boombox and bungee cords. Today's golf cart enthusiasts want the same kind of sound and performance for their carts that they want in their cars and trucks. We designed this complete system to deliver, with Wet Sounds audio gear, a sharp-looking dash kit, power, charging, and more. There's even a WeatherTech floor liner that's designed for your 2009-2022 EZ-GO TXT .
It's a big system, but that's because we designed it to be the best. And we know it sounds great, because we've built one ourselves. To learn more about that installation and other helpful details, check out this informative article.
It all starts with a dash kit
When you're installing cool audio gear in a golf cart, you need somewhere to put it. The VIP Dash Kit we used features cutouts for a gauge-mount receiver and two 6-1/2" speakers, and the carbon fiber finish will look great on your cart. To minimize rattles, you'll want to install the included Dynamat sound-deadening material throughout the cart, but especially on the underside of the dash kit.
Wet Sounds performance and quality
The heart of this system is the Wet Sounds WS-MC-2 marine digital media receiver. It fits neatly into the gauge opening and includes Bluetooth® connectivity, a global AM/FM/Weather tuner, a charging USB port, and an AUX input. With big buttons and a 2.7" LCD display, this rugged, IPX6-rated receiver is easy to read and easy to use.
This package also includes four Wet Sounds RECON 6-1/2" marine speakers. These marine-rated speakers let you choose from seven illumination colors, but they'll look even cooler with Wet Sounds LED rings. Rated for 60 watts of RMS power, these speakers sound as cool as they look.
To control the lights, there's a Wet Sounds RGB controller that can be installed in the dash, next to the stereo. For extra power, we've included a super-compact Wet Sounds STX Micro-4 amplifier that will fit under the front cowling. You'll connect it to the golf cart harness with a Wet Sounds amp kit.
Bass matters, even on a golf cart. The compact Wet Sounds Stealth AS-6 powered subwoofer fits under your cart's rear seat. The built-in amp delivers 250 watts of power to its 6" marine speaker and produces plenty of thump. The subwoofer driver is computer-matched to the enclosure, so you'll get plenty of low-end performance from this subwoofer. It comes with a remote level control, so you can tune it to suit your musical tastes.
The right harness makes all the difference
This Wet Sounds golf cart harness will make your installation vastly less complicated. With one space-saving cable, you can supply power to the stereo and LEDs, and signal to the speakers and sub. This all-weather harness features "plug-n-play" connections that will allow you to install Wet Sounds Recon and Revo Series speaker systems with RGB wiring, plus a plug-in that will work with select Wet Sounds digital media receivers and marine subwoofers. There's also a direct plug-in for a Wet Sounds RGB controller.
The finest floor mat
The WeatherTech golf cart mat is designed specifically for 2009-2022 EZ-GO TXT carts, so it fits right in. It's made from the same durable material used in their wildly popular WeatherTech FloorLiners, so it'll absolutely stand up to life in the outdoors. Sculpted channels trap moisture, while the patented cleat cleaner removes grass and dirt from shoes. You'll also be glad to know that it's 100% recyclable and also latex- and PVC-free.
Proper power
The challenge of installing a system this big in a golf cart is making sure it gets the power it needs. This EZ-GO uses a 36-volt battery bank, and you certainly don't want to complicate life by using a voltage reducer. Instead, this kit includes an XS Power XP2000 12-volt supplemental battery that will only power the sound system. This powerful battery fits your cart perfectly and provides plenty of audio time. You'll secure it with an XS Power billet aluminum hold-down kit.
For recharging, this kit includes a NOCO Genius charger that can fit neatly next to the battery. This compact powerhouse simply plugs into a wall outlet for fast, easy charging when you need it. It's earned an IP68 rating, too, which means it's totally waterproof and even saltwater-tested for corrosion resistance.
Hardware, too
The speakers don't come with mounting hardware, so we've included them in this package. This Metra pack has 10 black pan head screws and 10 speed clips. The screws are 1-1/2" long and this pack includes enough screws and clips to install a pair of speakers.
Product highlights:
- complete audio system for 2009-2022 EZ-GO TXT golf carts
system includes:
- VIP Dash Kit for Gauge-style Radios (carbon fiber finish)
- Wet Sounds WS-MC-2 Marine digital media receiver with Bluetooth
- Wet Sounds WWX-RGB-RS single-zone RGB controller
- Wet Sounds WWX-USB-MF-6FT panel-mount USB connector
- Wet Sounds STX Micro 4 compact marine/powersports 4-channel amplifier
- Wet Sounds Stealth AS-6 marine powered subwoofer
- Wet Sounds RECON 6-BG RGB 6-1/2" 2-way marine speakers with RGB LED lighting
- Wet Sounds LED KIT 6-RGB 6-1/2" LED light rings
- Wet Sounds GC-H4S golf cart wiring harness
- Wet Sounds GC-AMP-KIT golf cart amp wiring kit
- Wet Sounds RGB-4P-1M/3F 4-pin RGB LED wiring splitter
- WeatherTech Golf Cart Mat for EX-GO TXT models
- NOCO GENPRO10X1 GEN series Onboard 12V Battery Charger
- Dynamat Xtreme Squared 18 sound damping
- XS Power XP2000 supplemental 12-volt battery
- XS Power HD-3100 billet battery hold-down
- Metra HWP-0001 black pan head screws and speed clips
- warranty: 2 years
- MFR # 700GCG04
What's in the box:
- Wet Sounds WS-MC-2
- Marine digital media receiver
- Wiring harness (15A fuse)
- Trim-ring
- Front-panel cover
- Mounting bracket
- 4 Screws
- 2 Bolts
- 4 Hex-nuts
- Owner's Manual
- Wet Sounds STX Micro-4 :
- 4-channel amplifier with 9" power/signal pigtails on both ends
- Two 25A ATO fuses (installed in-line on power cable)
- 4 Self-tapping screws (length=3/4")
- 4 Mounting feet
- 2.5mm Allen wrench
- 2mm Allen wrench (attached to fuse holder)
- Owner's Manual
- Wet Sounds Stealth AS-6:
- Powered sub with grille installed (attached 5' power/signal cable)
- Wired remote level control (attached 16' cable)
- Two 30A fuses (one installed)
- 4 Feet
- 4 Hex-head bolts
- 4 Large phillips-head screws
- 2 Small phillips-head screws
- 4 Large washers
- 2 Small washers
- Installation/Owner's Manual
- "Break-In Procedure" note
- Wet Sound Recon 6-BG:
- Four 2-way marine speakers
- 4 Grilles (attached)
- 4 Rubber gaskets
- Four 8" Waterproof 2-pin female SuperSeal speaker harnesses
- Sixteen 1-1/4" Stainless steel Phillips head screws
- 2 Templates)
- Wet Sounds WWX-USB-FM 6FT:
- Panel-mounted USB input port (with attached 6' cable terminated by a male USB type-A connector)
- Rubber cap w/ attachment ring
- Locking collar
- Flanged locking collar
- Instructions on packaging
- Wet Sounds LED KIT 6-RGB:
- Four LED light strips with adhesive backing (attached 7" wire harness terminated in a 4-pin Deutsch connector)
- 4 Acrylic rings
- Four 7.5" RGB LED harnesses (Deutsch connector on one end / bare-ended wire on other end)
- Sixteen 1-1/2" screws
- Installation instructions
- Wet Sounds WWX-RGB-RS:
- RGB Controller with attached 7" power/ground and RGB harnesses (terminated in proprietary female plugs)
- 7" 4-Pin RGB harness
- 11" Power & ground harness w/inline 10A ATO fuse
- Owner's manual
- Wet Sounds GC-H4S:
- Four speaker-system golf cart wiring harness w/ inline 15A ATO fuse on battery connection and 10A ATO fuse on RGB harness
- VIP TXDHCFEZIRD:
- Custom-fit golf-car dash
- 4 Bolts
- 4 Nuts
- 2 Keys
- Installation Instructions
- WeatherTech W598:
- Golf cart mat
- Noco GENPRO10X1:
- Onboard battery charger w/attached 6' AC power cord and 6' power/ground cables (inline 15A ATO fuses on both cables)
- Two 1" self-tapping screws
- User guide & Warranty
- Accessory brochure
- XS Power XP2000:
- XP2000 battery
- 2 M6 bolts
- 2 Split lock washers
- XP Series Instruction Sheet
- XS Power HD-3100:
- 1 Base plate
- 1 Top plate
- 2 Spindles
- 4 Spacers
- Four 1-1/2" screws
- Two 1" screws
- 2 Flat-washers
- 2 Nuts
- 4 Rubber battery bumpers w/ adhesive backing
- Installation instructions
- Dynamat Xtreme Squared 18:
- 8 Sheets of Dynamat Xtreme
- Product leaflet
- Metra HWP-0001:
- Ten 1.5" Mounting screws
- 10 Speed clips
- Wet Sounds RGB-4P-1M/3F:
- Four 11" RGB 4-pin waterproof splitters
- Wet Sounds GC-AMP-KIT:
- 11.5' Loomed 10 ga. power & ground wires (inline 60A Maxi fuse)
- 15" 12-Pin T-harness
- Two 10 ga. crimp connectors
- Nine 18 ga. crimp connectors
- Installation instructions
Customer reviews for Wet Sounds EZ-GO TXT audio system
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Wet Sounds EZ-GO TXT audio system
![Russ B.](http://images.crutchfieldonline.com/ImageBank/v20180914095600/core/people/research/russ.png)
Product Research
Marine-Grade Receiver
Marine-Grade Speakers with LED Lighting
Amplifier with Amp Wiring Kit
Golf Cart Dash Kit & Mat
Battery & Charger
Marine-Grade Receiver
Marine-Grade The Wet Sounds WS-MC2 digital media receiver is built for the marine environment with an IPX6 rating and even has a voltage monitor and alarm to warn you when your vessel's battery voltage is reaching critically low levels. The Wet Sounds WS-MC2 round chassis mounts in a gauge-style opening, while its rectangular front-panel surface mounts to the helm. The included mounting bracket, hardware, and integrated gasket secure the digital media receiver to the flat surface.
- Cutout Dimensions: 3.085" (diameter) x 3.095" (depth)
- Front-Panel Dimensions: 5.115" (w) x 4.205" x 1.375" (depth)
- 4 Mounting Holes: 4.455" (w) x 3.405" (h) x 1.075" (depth)
Note: The Wet Sounds unit features a non-volatile memory (NVM), allowing it to retain audio settings, radio presets, zone configurations and more, even when power is disconnected from the unit.
2.7" Ultra-Bright Display: The Wet Sounds WS-MC2 features a 2.7" ultra-bright display, plus 3-way rotary-dial and push-button controls. The display provides station identification, song/artist/album info (including album art), and menu settings. This vibrant display has day/night modes that automatically switch with your vessel's lighting (its brightness can also be adjusted manually).
Wired Remotes: The WS-MC2 supports Wet Sounds' optional Wired Remote Controller with Display (MC-TR) and Wired Remote Controller without Display (MC-TR-MINI) - both sold separately.
- Wired Remote Controller With Display: For full control and display of the Wet Sounds WS-MC1 Marine Media Center System from anywhere other than the helm, you can connect the MC-TR wire remote (sold separately). You can use the MC-TR Y cable (sold separately) to connect up to two Wet Sounds MC-TR wired remotes to a Wet Sounds WS-MC1 system. An optional MC-TR EXT 23' extension cable is also sold separately.
- Wired Remote Controller: Another remote control option is to connect Wet Sound's MC-TR-MINI wired remote controller (sold separately). You'll also need the Wet Sound MC-TR-MINI-ADP 3.5mm-to-DIN adapter cable (sold separately), as well as install a firmware/software update onto the WS-MC1 via USB (see Wet Sounds website for more details). You can install up to two MC-TR-MINI wired remotes using the the MC-TR Y cable (sold separately) and two MC-TR-MINI-ADP 3.5mm-to-DIN adapter cables (sold separately).
Note: You can install one MC-TR wired remote with display and one MC-TR-MINI wired remote without display using the MC-TR Y cable (sold separately) and one MC-TR-MINI-ADP 3.5mm-to-DIN adapter cable (sold separately).
Bluetooth Audio Streaming: Thanks to built-in Bluetooth with support for A2DP/AVRCP 1.4, you are able to stream stored music, music apps, and other audio content on your Bluetooth-enabled smartphone or tablet device to the Wet Sound WS-MC2 digital media receiver. The system will even provide basic playback controls such as Play/Pause, Previous/Next Track, and Random/Repeat; as well as music browsing via Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks, or Podcasts (compatible with select iPhone & Android smartphones). In addition, the WS-MC2 will display song/artist info (including album art).
USB Input: The Wet Sounds WS-MC2 digital media receiver features a USB-A input for connection, music playback, control, song/artist/album display (no album art), and charging of a USB MSC (mass storage class) device or Apple iPod/iPhone with Lightning connector.
- USB MSC Playback: The WS-MC2's USB-A port supports MP3 music playback of a connected USB MSC (mass storage class) device, such as a thumbdrive. The unit provides Play/Pause, Previous/Next Track, and Random/Repeat control functions. It will also display song/artist info (including album art).
- iPod/iPhone Direct Connect: The WS-MC2's USB-A port can also be used to connect an Apple iPod/iPhone device with Lightning connector (not compatible with 30-pin devices). You'll be able to play back stored music and music apps on your Apple Lightning device through the digital media receiver. The system provides basic playback controls such as Play/Pause, Previous/Next Track, and Random/Repeat; as well as music browsing via Playlists, Artists, Albums, Genres, Songs, Composers, Audiobooks, or Podcasts (these categories can be searched alphabetically). In addition, the WS-MC2 will display song/artist info (including album art). The USB-A port (5V/1A) will even charge your connected Apple iPod/iPhone with Lightning connector.
Universal Panel Mount Input Port: The Wetsounds USBMF6F is a universal panel-mounted input port that gives you easy access to a USB audio connection while allowing your smartphone or playback device to be safely stored in a glove box or storage compartment. Designed for ATVs, boats, and on- or off-road vehicles, the USBMF6F can extend the USB connection from the back of a source unit to an easily accessible spot on the dash or console. This helps eliminate unsightly cables from hanging out of the dash or glove compartment and provides a more secure connection for your mobile devices.
- USB Input: The input port features a front-mounted female USB-A port with an attached 6' extension cable terminating to a male USB-A connector. A water resistant snap-on cover is provided to help keep out moisture and dirt when not being used.
- Mounting Options: The USBMF6F mounts in a 1" diameter mounting hole and secures with the included locking collars. The USB input port requires approximately 2.20" of mounting depth. The USBMF6F's front-panel measures 1.28" in diameter.
Aux Input: The Wet Sound's WS-MC2 is outfitted with a 3.5mm Aux input for connection of a portable digital audio player that features an analog output or headphone jack.
Pandora Internet Radio: The Wet Sounds WS-MC2 lets you playback and control the Pandora music app (for Apple iOS 10.0+ or Android 4.0+) ) that is being streamed to your Apple iPhone or Android smartphone device. The WS-MC2 will also display artist name, song title, and album art provided by the Pandora app on your iPhone or Android smartphone. Your iPhone can be connected to the system's USB port or via Bluetooth, while your Android (OS 4.0+) smartphone must be connected via Bluetooth. Your iPhone or Android smartphone will need an active Data Plan account with connection to the Internet via 3G, EDGE, LTE (4G) or WiFi. In addition, you will need an active Pandora music service account.
- Station List: You can select Pandora stations from your Station List by date or alphabetically (A-Z).
- Skip Songs: You can skip song tracks within a station. You cannot skip back to a previous song. Pandora limits the number of skips allowed.
- Thumbs Up/Down: You can give songs a thumbs up or thumbs down to help Pandora personalize stations to suit your preferences.
Note: Access to the Pandora service will depend on the availability of a cellular and/or WiFi network for purposes of allowing your iPhone or smartphone to connect to the Internet. Pandora is not supported in Canada and only available in the United States.
AM/FM/Weather Band Radio: The built-in AM/FM tuner provides manual, seek, and preset tuning. It also offers a Local/Distant feature which allows you to only pull in strong local stations or try to reach out to more distant radio stations. In addition, it features a Weather Band tuner so you can stay ahead of the storms out on the water. You can store up to 12 FM station presets, 6 AM station presets, and 6 WB station presets.
- RBDS: The Radio Data System (RBDS) feature displays radio broadcast information such as artist & track information when listening to compatible AM/FM stations.
- Tuner Region: You can select between USA, Russia, Latin America, Asia, Japan, Middle East, Australia & Europe tuning.
SiriusXM-Ready: The Wet Sounds WS-MC2 is SiriusXM-Ready and compatible with the SiriusXM Connect Vehicle Tuner (220SXV300 sold separately). The SiriusXM Connect Vehicle Tuner supports SiriusXM programming with access to 140+ SiriusXM channels via subscription; check out the most popular SiriusXM subscription packages here. Additional features of the SiriusXM Connect tuner include -
- Channel list displays a list of all available channels
- Category Search searches for channels in a certain category
- Displayed Information such as Channel Name, Artist Name, Song Title, and Album Art can be viewed on the head unit's LCD
- Up to 18 SiriusXM Satellite Radio station presets
- Channels containing unsuitable content for children can be blocked
Dual Zone Audio: The digital media receiver's Zone 2 line output allows you to set up two zone of audio on your boat or vessel. The receiver's Front & Rear outputs are designated for the Main Zone, while the Zone 2 line-level outputs are used for Zone 2. You can increase or decrease the volume level in Zone 2. However, the unit's main volume control will still override final output of the Main & Zone 2 outputs when its adjusted. The same audio source is played back in both zones.
- 4-Channel Amplifier: The Wet Sounds WS-MC2 digital media receiver features a built-in 25 watt RMS (50W Peak ) x 4 channel amplifier that is 2-ohm stable, so it can handle up to eight speakers. You can completely bypass the internal amp and turn it off for greater efficiency when using solely external power amplifiers.
- 6-Channel Line Outputs: The Wet Sounds WS-MC2 is outfitted with three pair of line-level outputs; including Front L/R, Rear L/R, and Zone 2 L/R. The Zone 2 line-level output can also be used as a Subwoofer output. The Zone 2/Subwoofer outputs are a mixed mono signal and not stereo. When the subwoofer line-level output is active, you can independently adjust its output level 0 to 20.
Equalizer: The Wet Sounds WS-MC2 offers 8 EQ presets - Flat, Rock, Classic, Acoustic, Dance, Electronic, Hip-Hop, and Custom. The Custom mode allows you to manually adjust its 7-band EQ (80, 250, 500 1k, 2k, 4k, 10k Hz) from -12 to +12.
Crossovers: The WS-MC2 offers a high-pass crossover for the front & rear outputs and a low-pass crossover for the subwoofer output (when activated).
- High-Pass Filter (HPF): The HPF controls the frequencies which are allowed to pass through the front & rear outputs. Choosing 60Hz, 80Hz, or 120Hz means that all frequencies below those will be blocked from passing. Choosing "All Pass Filter" will allow all frequencies to pass through the front outputs.
- Low-Pass Filter (LPF): The LPF is only available when the unit's Zone 2 output is set to "Subwoofer". This will control the frequencies which are allowed to pass through the subwoofer outputs. Choosing 60Hz, 80Hz, or 120Hz means that all frequencies above those will be blocked from passing. This would be ideal for an amplifier driving a subwoofer or a self-amplified subwoofer. Choosing "All Pass Filter" will allow all frequencies to pass through the subwoofer outputs. This would be ideal for an amplifier driving a set of Tower Speakers.
Source Gain: Often times the output of different sources varies widely, resulting in an abrupt volume change when switching from one source to another. This setting will compensate for that variance by allowing adjustment of the output of each source input individually with a range of -3dB to +3dB.
Marine-Grade Speakers with LED Lighting
Marine Speakers: Both the speaker frame and grille are made of Nylas, a composite mix of Nylon and Fiberglass, providing strength and stability. The grilles are held in place by four screws, accessible under the mounting gasket, but the tweeter is mounted to the grille, so it should not be removed. Durability is further improved by the rubber spider Wet Sounds developed for their marine speakers.
- Tweeters: The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
- Speaker Terminals: A male 2-pin waterproof SuperSeal plug is on the signal input wire, which connects to the included female SuperSeal harnesses. The red wire is positive and the black wire is negative.
Note: These speakers fit into the openings for standard 6½ and 6¾ speakers (standard car speaker sizes). Because the frame is bigger than a typical car speaker and the grille is not designed to be removed, they won't fit in most car applications.
RGB LED Kit: The Wet Sounds LED KIT 6-RGB lets you add RGB lighting to the included Wet Sounds Revo 6 marine speakers (all sold separately). The kit includes two opaque acrylic rings, that mount underneath your speaker's grille, and two 18" RGB LED light strips, that get attached to the inside of each ring using the attached adhesive backing. Longer mounting screws are provided for installation. Each RGB LED light strip features an attached 7" wire harness terminated in a 4-pin Deutsch connector.
RGB Controller: The Wet Sounds WWX-RGB-RS single zone RGB controller lets you control the included RGB lighting kit from a single compact switch that can be console- or panel-mounted. Designed for marine and outdoor environments, the RGB Controller features a sealed construction with rubberized buttons and mounting gasket, helping prevent moisture and particle ingress. The RGB controller also features Wet Sound's SuperSeal wire harnesses, designed to prevent terminal corrosion.
- Controls: The WWX-RGB-RS's LED-backlit buttons can easily be seen in low-light conditions. Functions include Power, Mode (Solid, Music Fade), Favorites (1-2), and Arrow Keys.
- Mounting: The WWX-RGB-RS is designed to fit most standard Carling-style switch cutouts. Spring-clips on top and bottom of the switch let it easily snap into place inside a switch opening. A rubber gasket helps provide a tight seal against the elements. The switch requires an opening that's 0.86" wide x 1.41" high, with approximately 2.5" of mounting depth.
- Wiring: The RGB controller includes two attached 7" wire harnesses, terminated in Wet Sounds SuperSeal weather-proof connectors. Two additional harnesses are provided to plug into these and have bare-ended wire terminations. One harness connects to the vehicle's power and ground and includes an inline 10A ATO fuse. The second harness provides the RGB outputs for controlling your RGB LED lighting (sold separately). Black provides the +12V output while individual Red, Green, and Blue wires provide the ground connection for their corresponding colors.
Stealth Series Powered Sub: The Wet Sounds Stealth AS-6 is powered subwoofer designed for Side-by-Side's, ATV's, golf carts, and boats. Its a high performance 2-wire, 12-volt audio system for your recreational vehicle.The Wet Sounds Stealth series powered sub features a 6" high excursion woofer with a polypropylene cone and rubber surround for deep bass performance. The powered subwoofer's 250W Class D amplifier is sealed against moisture and dirt for extra protection and power. The powered sub's tough and durable molded Polyethylene enclosure is designed to handle the harsh environment while providing superior sound. A durable aluminum grille is used to protect the woofer and match Wet Sounds' Stealth series soundbars.
- Rear-Panel Controls: The Stealth series powered subwoofer is equipped with a gain control (min/max), variable low pass crossover (50-200Hz), variable bass boost (0-12dB @ 45Hz), and phase switch (0°/180°). These controls are located on the rear-panel of the powered subwoofer behind a clear plastic panel which must be removed by unscrewing six hex-head screws.
- Wired Remote Level Control: The Wet Sounds Stealth AS-6 comes with a wired remote control to fine-tune the volume level of the powered sub with the rest of your system. The wired remote control features an integrated mounting bracket designed to mount under the dash or other flat surface. An attached 16' cable runs from the wired remote's mounting location to the powered sub's mounting location.
- Minijack Input: The Wet Sounds Stealth AS-6's audio input consists of a male 3.5mm minijack connector that is attached to the powered sub via a 5' cable. This male 3.5mm minijack connector plugs to the female 3.5mm line output jack of your Wet Sounds soundbar or other amplified soundbar speaker's analog output.
- Wiring: The powered sub features an attached 5' power/ground harness which will need to be hardwired to your recreational vehicle's electrical system. The power (red) and ground (black) leads both have ring terminals attached. The Power wire also features an inline 30A fuse. In addition, there is a remote turn-on wire (blue). The powered subwoofer's remote turn-on wire connects to the remote output on the Wet Sounds Stealth series soundbars. If you have a soundbar without a remote turn-on, the powered sub has auto sensing as well to turn on automatically.
- Mounting Hardware: The Wet Sounds Stealth AS-6 comes with adjustable mounting feet and stainless steel mounting hardware.
Dynamat Xtreme: Dynamat Xtreme provides 4 times the damping efficiency of Original Dynamat, the conforming ability of Premium Dynamat, and the radiant energy reflection of Super Dynamat. Dynamat Xtreme has an aluminum layer for high-temperature areas and requires "no heat" for an easy, moldable installation. : Each sheet has a high-tack permanent adhesive with a peel-off plastic liner on the back of the Dynamat Xtreme. All materials cut easily with scissors or a razor knife.
- Clean the mounting surface.
- Using a razor knife or scissors, cut the Dynamat to the desired size.
- Remove the blue release liner from the back of the Dynamat and apply to the mounting surface.
- Apply pressure, working the Dynamat into the contours of the mounting surface.
- Work air out with a roller tool (eliminating air pockets will ensure lasting adhesion of the Dynamat to the surface, giving you maximum damping effect).
- Repeat the same process for each sheet of Dynamat.
Note: The Dynamat Extreme provides a total of 18 square feet. Each sheet measures 18.0" (wide) x 18.0" (long) x 0.050" (thick)
Amplifier with Amp Wiring Kit
Marine Class DAmplifier: This Wet Sounds Stealth STX Micro series amplifier features a completely sealed die-cast aluminum chassis to keep out water and dirt, making them ideal for motorcycles, ATVs, and other power sports. In addition, all of the connections enter the amplifier through sealed ports on each end of the amplifier. The Stealth STX amplifiers have a tiny footprint, only 9-1/4" long and 4" wide, which allows you to mount them in the limited space found in ATV or UTV vehicles.The STX Micro-4 features state-of-the-art Class D amplification which provides ample power in a small space for your marine, motorcycle, or off-road vehicle. The amp's power output is as follows - 80 watts x 4 @ 4 Ohms, 130 watts x 4 @ 2 Ohms, or 280 watts x 2 @ 4 Ohms bridged.
- Control Panel: The top-mounted control panel is protected by a cover to help keep the controls dry, and to prevent unwanted adjustments. The cover screws can be removed with the supplied 2.5 mm Allen wrench. The rotary controls and slide switches require the use of a narrow flat-head screwdriver (not supplied) to make adjustments. This 4-channel amplifier features independent controls for Channels 1+2 and 3+4:
- Crossover Selection Switch (CH1+2, CH3+4): The switches let you set each crossover to Low-pass (LPF), High-pass (HPF), or Flat (crossover disabled).
- Sensitivity (CH1+2, CH3+4): Independent Sensitivity controls for each pair of channels let you match the amplifier to the source unit. The input sensitivity of the amp ranges from 150mV (Min) to 7V (Max).
- Crossover Frequency (CH1+2, CH3+4): The amplifier's crossover is continuously variable from 40 Hz to 400 Hz, and has a slope of 12dB/octave.
- Channel Select: You can set the input selector to 2CH or 4CH. In 2-channel mode, all 4 speakers will play using only the Front input. In 4-channel mode, the front and rear speakers are independent, and must receive both a front and rear input. When bridging the amplifier, the switch should be in 2CH mode.
- Power Protect: This LED will light up red at start-up, then change to blue if all connections are OK. In the event the amp should go into protect mode, from short circuit or over/under voltage), the LED will glow red until the problem is resolved.
- Connections: The STX Micro-4's wiring connections are on both ends of the amplifier, and in some cases are not terminated. The power and speaker connections to the amp are sealed internally, so you will need to splice them to your wires. The connections are as follows:
- Power: The amplifier's 8 AWG power wire features an in-line waterproof fuse holder with two 25A ATO fuses inserted. The power wire is terminated with a ring terminal.
- Ground: The 8 AWG ground is terminated with a ring terminal.
- Remote Turn-on: The 16 AWG ground is not terminated.
- Speaker Outputs: The amp's 4-channel speaker outputs are 16 AWG wires with no terminals.
- Inputs: The amp features two stereo 3.5mm (female) inputs located on the opposite end from the power/speaker wires. The inputs have a wide enough gain range to accept a direct input from a smartphone, tablet, or other portable device. The terminal features a splash-resistant cover.
- Output: A stereo 3.5mm (female) output is provided for passing through the audio signal to another amplifier or an amplified subwoofer.
Amp Kit: The WetSounds GC-AMP-KIT lets you install a WetSounds STX Micro-4 amplifier (sold separately) into your golf cart. The Amp Wiring Kit includes 11.5' of pre-loomed 10 ga. power and ground wire with an inline 60A Maxi fuse and fuse holder, along with a 15" T-harness designed for a direct connection to a WetSounds MC-2 or MC-20 radio (sold separately). Combined with the optional WetSounds GC-H4S Golf Cart 4-speaker wiring harness, The GC-AMP-KIT allows for a complete installation of the Micro-4 amplifier into your golf cart.
Audio System Harness: The Wet Sounds GC-H4S Audio System Harness lets you add Wet Sounds speakers and audio components, including RGB lighting, to your golf cart with "plug-n-play" ease of installation (audio components sold separately). All wiring is protected with a rubberized coating and loomed in a braided sheath for durability and protection from the elements. Multiple water-proof connections and wiring are provided for the following connections:
- Power & Ground: Two ring-terminated 16 AWG wires are provided for connecting to the vehicle's battery terminals, providing power and ground for the system. The power wire includes an inline 15A ATO fuse.
- Speakers/RGB Connections: Two wiring harnesses are provided for each of the 4 speaker locations - one 2-pin harness for the audio signal and a 4-pin harness for powering speaker RGB LED lighting, if applicable. This allows a direct connection to select Wet Sounds Recon and Revo speakers.
- Radio Harness: A 12-pin Molex connector is designed to plug into select Wet Sounds radios such as the WS-MC-2 marine receiver, providing power, ground, remote output, and speaker outputs. Two RCA connectors are provided at the radio location, that terminate in a female 3.5mm audio jack on the other end, for connecting to an optional powered subwoofer.
- RGB Controller: If installing speakers with RGB lighting, a 2-pin power/ground harness (with inline 10A ATO fuse) and a 4-pin RGB harness are provided for connecting to an optional Wet Sounds RGB lighting controller such as the WWX-RGB-RS.
- Subwoofer: Two connections are provided for connecting to an optional Wet Sounds AS Series subwoofer. A female 3.5mm audio cable provides the audio input from the radio, and a blue Remote Turn-On wire, which is pre-attached to the radio harness on the other end, can be used to activate a powered subwoofer. *Power and ground connections are not provided for a powered subwoofer.
Note: Additional wiring may be required based on specific components being installed.
Golf Cart Dash Kit & Mat
Golf Cart Dash Kit: This custom dash from V.I.P. is designed to specifically fit 1997-2013 E-Z-GO TXT golf carts without modification (2014-up models require modification). It features pre-cut openings for a gauge-style marine digital media receiver and two 6.5" marine speakers, as well as your golf carts steering column, ignition switch, and an optional USB/Aux port. It also offers four cup-holders, a tray holder, a side pocket, and a locking storage compartment.
- Gauge-Style Receiver Opening: The V.I.P. E-Z-GO TXT Dash features a round opening to mount a gauge-style marine digital media receiver. The gauge-style opening measures 3.0" in diameter and will accommodate a receiver with up to 4.75" of depth. The receiver's outer trim-ring should not measure more than 4.055" in diameter. It will fit most gauge-style marine digital media receivers.
- Two 6.5" Speaker Openings: The V.I.P. E-Z-GO TXT Dash features two round openings that will fit many 6.5" marine speakers. The two round speaker cut-outs measure 5.3125" in diameter and will accommodate a speaker depth up to 4.125". The speakers frame & grille diameter should not exceed 8". Speakers must have a cutout diameter of 5.31" or less to fit inside the speaker openings. If you have any questions, please consult our sales team for the best speaker fit.
- Other Cut-outs: There is also a cut-out for the steering wheel shaft, ignition key, and an optional USB/Aux panel-port (sold separately - see accessory list). You may need to modify the cut-out (0.875" in diameter) for the optional USB/Aux panel-port. The ignition key cutout diameter is 0.75". In addition, there is space to make your own custom cut-outs for light switches, meters, gauges, etc.
- More Features: The V.I.P. E-Z-GO TXT Dash is equipped with four cup holders for your drinks, a tray for your smartphone, a side pocket for your sunglasses, and a locking storage compartment for your valuables. The floorboard of the golf cart creates the bottom of the storage compartment.
Modification Note for 2014-up Models: On 2014-up models, the factory ignition switch is on the left side of the dash (instead of the right side on previous years). There is enough slack in the ignition wire to move it to the right side. If you wanted, you could also drill a new hole on the left side to keep it in the factory location, but that would require extra modification and cutting, plus there would be an empty hole on the right side.
2009-2022 EZGO TXT Golf Cart Mat: WeatherTech's Golf Cart Mat provides full coverage for your golf cart's flooring in one easy-to-install piece. Made from the same durable, slip-resistant material as WeatherTech's popular FloorLiner HP vehicle mats, the Golf Cart Mat won't crack, curl or break down over time. The Golf Cart Mat also features the same sculpted channel pattern as WeatherTech's All-Weather Floor Mats, trapping water and messes, which then flow off via drainage vents. In addition, a patented cleat cleaner makes removing grass, mud and dirt from shoes easy. No retention devices or snaps are needed, making it effortless to install and remove the Golf Car Matt for cleaning. The Golf Cart Mat is 100% recyclable and latex and PVC-free.
Battery & Charger
XS Power Battery: The XS Power XP2000 is a 12-volt battery that is designed to be used as a supplemental power source in your vehicle. It can be used to provide additional power for your car audio system, or can be used in marine applications. It is not designed to be installed under the hood or replace the OEM battery in your vehicle.XS Power's AGM (Absorbent Glass Mat) batteries use a fibrous material to suspend the liquid electrolyte against the lead plates. Because the electrolyte is absorbed in the material, there is little chance of an acid leak, even in the event the case is ruptured. AGM batteries contain more lead compared to traditional "flooded" batteries, thus producing more power.
- Specifications: The XS Power XP2000 has a maximum output of 2000 amps, reserve capacity of 150 minutes, and discharge capacity of 80 aH (amp hours). It measures 20.2" (w) x 8.46" (h) x 6.54" (d), and weights 52 lbs.
- Terminals Needed: This XP-series battery does not come with battery terminals, so you will need to purchase the proper terminal adapters to fit the inner diameter of your power ring terminals before installing. Recommended terminal adapters include: Two 5/16" brass stud adapters (#589), Two 3/8" brass stud adapters (#590), or Two 5/16" + Two 3/8" brass stud adapters (#588). You could also choose the Short Brass Post Adapters (#580).
- Charging the Battery: It is very important to properly charge an Absorbent Glass Mat (AGM) battery before using. Improper charging will permanently damage the battery (swelling, etc.), and will void the warranty. XS Power offers two 12-volt High Frequency IntelliChargers designed for charging AGM Batteries: the 8-amp HF1208 and the 15-amp HF1215 (both sold separately). The chargers have a microprocessor that monitors the charging process to avoid overcharging, and are strongly recommended for this battery.
Battery Hold Down: The XS Power HD-3100 battery hold down is machined from solid billet aluminum.. The hold down can accommodate batteries up to 6.84" wide with a maximum height of 8.50" when using both sets of included spacers. 8.30" of height is provided, if using only one set of spacers, and 8.05" if no spacers are used. Attached rubber pads on the top and bottom plates help provide a secure fit for your battery. A 7/32" (0.21875") hex-socket bit is required for assembly (not included).
Onboard Battery Charger (1 Bank/10 Amp): The Noco Genius GENPRO10X1 is an Onboard Battery Charger, rated at 10-amps for charging and maintaining a single 12-volt Marine, Starter, or Deep-Cycle battery. Its waterproof, shock, and vibration-resistant design allows it to be used in a variety of 12V applications including boats, gas vehicles, electric vehicles, and industrial equipment. It monitors battery activity for safe, fast and efficient charging of Wet, Gel, AGM, and Maintenance Free batteries without the worry of overcharging. And its one of the most advanced charging systems, designed for improved battery performance and longevity.
- Compatible Battery Types: The GENPRO10X1 Onboard Battery Charger is suitable for charging all types of 12V lead-acid and Lithium-ion batteries - including Wet Cell (Flooded), Gel Cell, AGM, Calcium, and Maintenance-Free Batteries with a capacity of up to 230Ah.
- Protection Circuitry: The GENPRO10X1 is a non-igniting and temperature controlled onboard battery charger for safe and worry-free operation. Its built-in redundant levels of safety protection protect against adverse and abnormal conditions - like reverse polarity, sparks, overcharging, over-current, open circuits, short circuits and overheating. Four Error LEDs on the charger will light to indicate one or more of the aforementioned problems is present.
- Ultra-Rugged Construction: The GENPRO10X1 is a 100% completely sealed waterproof onboard battery charger and is fully submersible. Its designed to operate in extreme conditions with a waterproof, shock, and vibration resistant rugged construction, as well as, saltwater tested to combat corrosion.
- Intelligent Maintenance Technology: Most manual, automatic or semi-automatic battery chargers continuously trickle charge batteries, making them susceptible to overcharge, which limits battery life. Noco's intelligent battery maintenance technology monitors battery activity and only begins charging when needed, and allows for continuous operation without user intervention and zero risks of overcharging your battery. An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates. The charger can be left connected to the battery indefinitely.
- 12V Repair: 12V Repair is an advanced battery recovery mode for repairing and storing old, idle, damaged, stratified or sulfated batteries. Batteries tend to become damaged if kept at a low charge and/or never receive a full charge. Battery sulfation and stratification will artificially raise the open circuit voltage of the battery, causing it to appear fully charged while providing low capacity. 12V Repair tries to reverse these problems and is best performed after taking the battery through a full charge cycle.
- Force Mode: This mode allows the charger to be manually set, or "forced", into charging when the connected battery's voltage is too low to be detected. After 5 minutes in Force Mode, the charger will return to the normal charge operation.
- Advanced Diagnostics: Noco chargers include built in redundant levels of safety protection for their chargers to keep you and your vehicle safe. It offers protection against reverse polarity, sparks, overcharging, over current, open-circuits, short-circuits, and overheating. Four illuminated icons can display 5 errors, Standby, Battery Voltage, Short Circuit, Reverse Polarity, and Temperature (too high/low), by lighting or flashing when a corresponding problem is detected, letting you know immediately what the problem is and how to remedy it.
- Mounting & Installation: The GENPRO10X1 has two external holes for mounting (screws included). It is important to keep in mind the distance to the battery. The Noco charger is outfitted with an attached 6' AC power cord and a 6' DC cable. The AC power cord is terminated by a two-prong AC plug, while the 6' DC cable is terminated by power & ground eyelets (3/8").
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...